Preparing To Work - sunjoe iON100V-10PS-CT Manuel D'utilisation

Masquer les pouces Voir aussi pour iON100V-10PS-CT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. When charging is complete, remove the battery from the
charger by pulling the battery backward to unlock it from
the charger (Fig. 22).
Fig. 22
7. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become
fully discharged as this will cause irreversible damage to
the battery.
Charger Light Indicator Table
Consult to the table for meanings and possible solutions for
the charger indication light. If there's anything not indicated
in the table or you are not sure about the cause and cannot
fix the charger, contact the Snow Joe
service center at 1-866-SNOWJOE (1-866-766-9563).
+ Sun Joe
customer
®
®
15
Indication
• Red Light – Steady
• Green Light – Off
• Red Light – Off
• Green Light – Slowly
flashes
• Red Light – Off
• Green Light – Steady
• Red Light – Off
• Green Light – Rapidly
flashes
• Red Light – Slowly
flashes
• Green Light – Off
• Red Light – Rapidly
flashes
• Green Light – Off

Preparing To Work

Chain Lubricant
m
CAUTION!
• Before starting the saw, remove the oil tank cap and
add bar and chain oil to the top of the oil tank (Fig. 23).
Refill when the oil level drops to 1/4 of the tank.
NOTE: Your cordless pole chain saw is equipped with an
automatic oil pump for bar and chain oiling. You must add
bar and chain oil or your pole chain saw will not function
properly. Failure to timely refill the oil tank will cause
damage to the bar and chain.
Possible Cause
(Solution)
• No load charging –
There's no battery inserted
in the charger.
• Normal charging – The
battery is being charged.
• Fully charged – The battery
is fully charged and the
charging process is finished.
• Discharged – The battery is
heavily discharged. It may
take longer to charge.
• Temperature abnormal –
Charging process will start
when battery returns to
normal temperature.
• Over current charging –
The current coming through
the charger is greater
than what the charger can
support. Stop charging as
soon as possible.
• Abnormal performance
– Something is wrong with
the battery or the charger.
Contact Snow Joe
+
®
Sun Joe
customer service
®
at 1-866-SNOWJOE
(1-866-766-9563).

Publicité

Table des Matières
loading

Table des Matières