Patek Philippe 5536315 Mode D'emploi page 19

The watchmaker will completely disassemble the
19
movement and then clean and inspect all parts
and lubricate them in the reassembly process. All
functions of the watch will also be tested in detail
and the escapement regulated if necessary. Finally,
its rate accuracy will be monitored and precision
adjusted for a further period of two weeks. The
entire process may take several weeks because
each watch must undergo a complete series of tests
to fulfill the strict quality criteria of Patek Philippe.
If you have any questions regarding the maintenance of your
watch or need the address of the Authorized Patek Philippe
Service Center nearest you, contact our International Customer
Service department in Geneva, or visit www.patek.com.