Patek Philippe 5536315 Mode D'emploi page 13

– Do not perform any calendar corrections
between 8 p.m. and 2 a.m. During this period, the
mechanisms that change the displays are active
and could be damaged by manual interventions.
– Always start by setting the time to 6 o'clock in
the morning and the date to the first day of the
month before performing any other calendar
corrections (see instructions in step 1 below).
– All settings and corrections must be performed
in the specified order.
1. preparations
Start by manually winding the movement (max.
10 turns of the crown) to get it going before pro-
ceeding with any other setting or correction.
Advance the hands with the crown until the ret-
rograde date hand moves forward by one day, and
then set the time to 6 o'clock in the morning.
Now, repeatedly press the push piece between
11 and 12 o'clock until the retrograde date hand
points to the first day of the month.
/
2. setting correcting the leap year cycle
and the month
Repeatedly press the push piece between 3 and
4 o'clock until the aperture at 12 o'clock reveals
the correct year (IV represents the leap year)
and the aperture at 3 o'clock displays the cor-
rect month. Leap year cycles can be found in the
Full Moon and Leap Year Calendar brochure delivered
with your watch.
13