Hendi 268506 Mode D'emploi page 5

Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Preparation before using for the first time
• Remove all protective packaging and wrapping.
Make sure no packaging debris remain on the
appliance.
• Check for completeness (1 dripping tray includ-
ed) and any transport damage. In case of damag-
es or incomplete deliv¬ery, please contact suppli-
er (See --- > Warranty page).
• Keep the packaging for storing your appliance
when not in use for an extended period of time.
Main parts of the appliance
1
1. Switch for roller rotation: Press to the "I" position to start rotation of the rollers.
2. Heating indicator: Light ON in orange when under heating.
Light OFF when the set temperature is reached.
3. Temperature control knob: Up to 150 °C
4. Rollers
5. Drip tray
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
• Ensure there is enough clearance around the ap-
pliance. Place the appliance in a well-ventilated
area.
Note: Due to the manufacturing residues, the
appliance may emit a slight odor in the first few
cycles. This is normal and does not indicate any
defect or hazard. Make sure the appliance is well
ventilated.
2 3 4 5
EN
5