Publicité
Les langues disponibles
Les langues disponibles
VW Bora 4-motion
2000 - ....
Ref. 1270
Fitting instructions
1)
Disassemble the light units and the bumper. Permanently remove the metal buffer beam in the rear.
2)
Pace the tow bar with the supporting arms in the holes in the rear of the chassis. Points (A) are matching with the
provided drillings in the side of the chassis.
Insert the bolts and washers and tighten everything firmly.
3)
Make an incision in the bumper, according undermentioned sketch, so that the ball can be attached.
4)
Assemble (*) and tighten everything firmly.
Composition
1 tow bar reference 1270
1 ball T43K000
2 bolts M12x40
2 bolts M12x40 – DIN 7991
4 security washers M12
2 nuts M12
4 bolts M10x35
4 security washers M10
4 washers 40x35x12x4
1 security shackle
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*-B)
(*)
(B)
(*-B)
(B)
(A)
(A)
(A)
(*)
All bolts and nuts : quality 8.8
Publicité
