Albrecht DR 460 C Mode D'emploi page 30

See Section 9.3 Network for detailed network confi gurations.
You can set the network connection at the fi rst start or later.
• Press (On/Off) to enter standby mode. The time, date and active alarms are shown on
the display.
• If you have set up the network connection and use the DR 460 C again within the network, the
connection will be established automatically. If you would like to change the network, call up
Settings to change the corresponding connection.
• Enter the network password using the keypad on the remote control or via ▲ and ▼. If the
desired character is displayed, press ► to navigate to the next entry. At the end of the input,
press OK to confi rm. Alternatively, press ◄ to navigate to the previous entry.
30 English