Timer; Language - Albrecht DR 460 C Mode D'emploi

At the time of the alarm the radio connects to the Internet if the set network is available. Therefore
there may be some delay before the radio starts playing your station. If no network connection is
established within one minute, the alarm will change automatically to Melody.
If the NAP alarm is activated, it alarms once after 5/10/20/30/60/90/120 minutes depending on
which one you have set.
You may choose Alarm Volume to confi gure the volume of the alarms. During the alarm the volume
will increase automatically up the set value (Crescendo function).
When the alarm(s) is/are set, there will be a clock icon at the top of the display. The clock icon with
alarm time will also be displayed on the standby screen.
During alarm, press any key to enter snooze mode. It will alarm again in 5 minutes. Press the
key to stop the alarm.

9.6. Timer

Press ◄/► to set the timer, press OK to start. The timer will count down and beep sound when it
reaches 00:00. To cancel the timer, enter the timer screen and press OK again. When the timer
is running, you can change the mode, the remaining time is then displayed in the top right of the
display.

9.7. Language

Select the OSD language: English / Deutsch / Español / Français / Português / Nederlands /
Italiano / Pусский / Svenska / Norsk / Dansk / Magyar / Český / Slovenský / Polski / Türkçe / Suomi
English 41