Charging The Battery - ACME zoopa Thunder 800 Speedboot Manuel D'utilisation

First steps and information Firs
.
Read this manual carefully.
The zoopa Thunder 800 is a RTR (Ready-to-Run) model.
For activation, you additionally require 4 pieces 1.5V AA mignon batteries for the controller. Please
insert these inside the battery housing that is located on the underside of the controller. Make sure you
have closed the cover after you have inserted the batteries.
ACME the game company GmbH assumes no liability for privacy violations and damage to private
property caused by the user of the model.
Please follow carefully the instructions in this manual step by step, to ensure proper handling.
a

Charging the battery

The supplied LiPo-Battery will be charged through the provided charging module.
Connect the charging module with the power adaptor and plug into a 220V socket. A Green LED
confirms the activation of the module. Now connect the battery. Check the polarity and make sure it is
safely plugged.
A Red LED displays the charging procedure which is finished as soon as the LED shuts off again. This
process can take up to 6 hours.
Please only use the original battery as batteries of different suppliers may have another polarity!
www.ACME-online.de
ACME the game company