Mounting The Antenna; Charging The Battery - ACME Zoopa Thunder 01 Manuel D'utilisation

www.ACME-online.de
First steps and information
The zoopa Thunder #01 Speedboat is delivered with a matching stand. We recommend to
place the boat on this stand as long as you are not using it to avoid damages.
The zoopa Thunder #01 Speedboat is a RTR (Ready-to-Race) Model. To start it, all you need
are 4 pieces of 1.5V AA batteries for the RC controller.
Please note that there are privately owned waters. Make sure that you have the permission of
the owner before you start the boat. ACME the game company GmbH assumes no liability for
privacy violations and damage to private property caused by the user of the model. Please
follow the instructions in this guide carefully step by step, to ensure proper handling. We wish
you much fun with the zoopa Thunder #01 Speedboat.

Mounting the antenna

The zoopa Thunder #01 Speedboot is completely assembled out of the box. All that needs to
be done is to mount the antenna.
To do this, lead the antenna wire through the tube.
Make sure that it is inserted completely.
Finally put on the rubber cap.

Charging the battery

The supplied Li-Ion battery will be charged through the contained USB- Cable.
Always charge the battery outside the hull.
The battery is charged through the wide, white balancer plug. The matching socket is located
at the other end of the USB- Cable. Connect the battery with the USB- Cable.
Now connect the cable with an USB- power source, for example your computer.
Alternately, it can be powered through an USB power adaptor
(Art. No. FCHD43).
When connected, the USB plug lights up in Red. As soon as the LED switches off, the
charging process is finished and you can connect the battery to the model.
ACME the game company