Resetting Total Energy Meters - CARLO GAVAZZI WM20 Manuel D'instructions

Resetting without password access, from the reset menu
1. From any page in the measurement menu, enter the reset menu: the Reset dmd ?
page is then displayed
2. Select the option YES.
3. Confirm the operation: the message "Resetting" is displayed and then the page
Reset max?.
4. Select the option YES.
5. Confirm the operation: the message "Resetting" is displayed and then the
measurements page set in the Home page.

Resetting total energy meters

The analyzer measures the active and reactive energy, both imported and exported. The
total meters are displayed and can be reset directly via the main unit, while partial meters
are via communication.
The following section outlines the procedure to simultaneously reset the total meters for
active and reactive energy imported and/or exported.
1. From any page in the measurement menu, enter the settings menu: the
Password?page is then displayed.
2. Enter the password and confirm.
3. Scroll through the pages to display the Reset page and enter the sub-menu: the
Reset max page is then displayed.
4. Scroll through the pages to display the page Energy pos.
5. Modify the parameter and select the option YES.
6. Confirm the operation: the message "Saving" is displayed and the energy meters for
imported active and reactive energy are reset.
7. View the next page (Energy neg).
8. Modify the parameter and select the option YES.
9. Confirm the operation: the message "Saving" is displayed and the energy meters for
exported active and reactive energy are reset.
38
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA