Setting A Parameter; Running A Pulse Transmission Test - CARLO GAVAZZI WM20 Manuel D'instructions

Operation
Decrease a parameter value/
View the previous value option/
Modify the value in the fields dP and Sign*
Move between value fields *
Exit the sub-menu and view relative title page
NOTE *: for details, see "Numerical Parameters" on page 43 and "Address
parameters" on page 44.

Setting a parameter

Fig.33 Procedure example: how to set Run hour=14000.
NOTE: the procedure requires entry of the multiplier K. The initial status of the
procedure is the Run hour page of the settings menu.

Running a pulse transmission test

If the digital output is configured to transmit energy consumption via pulses, a test
transmission can be run.
1. In the settings menu, enter the sub-menu Dig out 1 or Dig out 2 (depending on the
digital output concerned)
2. Ensure that the output is configured for pulse transmission (Function = Puls)
36
8021572 | WM20 | © 2016 | CARLO GAVAZZI Controls SpA
Button
1,5
s