Bt Operation - auna Worldwide CD Mode D'emploi

EN
58

BT OPERATION

The unit has a BT function that can receive a signal within 8 metres.
Pairing the unit with a BT device to listen to music:
1. Press the MODE button repeatedly to select BT mode.
2. If the unit is not paired with any BT device, the right hand corner will
show a flash the BT symbol.
3. Activate your BT device and select the search mode.
4. "Worldwide CD" will appear on your BT device list.
5. Select "Worldwide CD" and enter "0000" for the password if necessary.
6. To disconnect the BT function, switch to another function on the unit or
disable the function from your BT device.
1. The operational range between the unit and the device is approximately
8 metres.
2. If the signal strength is weak, your BT receiver may disconnect, but it will
re-enter pairing mode automatically.
3. For better signal reception, remove any obstacles between the unit and
the BT device.
4. This unit supports A2DP (Advanced Audio Distribution Profile) and
AVRCP (Audio Video remote Control Profile) functions. This can only be
paired with one BT device at one time.
5. Compatibility with all devices and media types is not guaranteed.
6. Some mobile phones with the BT function may connect and disconnect
as you make and end calls. This is not an indication of a problem with
your unit.
7. If the unit without connect BT device, it automatically turns to Standby
mode after 15 minutes.