Controllable Functions - LGB Tm 2/2 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Function Mapping DCC
It is possible to assign functions controlled from the decoder to function buttons
of your choice (mapping). To do this an appropriate value must be entered in the
appropriate CV.
The CVs (lines) and the functions (columns) are listed in the tables on pages 40/41.
Four CVs belong to each button. For space reasons the 4 CVs were put together in
one line starting with CV 282 (Button F5).
It is basically possible to assign several functions to one button or one function to
several buttons.
Note: The programming for function mapping should be done only by experienced
users.
Individual functions can be controlled by means of SUSI depending on the design of
the decoder. These functions can be handled by the decoder as sound. The volume
levels belonging to these functions cannot be changed.
Examples of Function Mapping:
AUX 2 is to be forwards and backwards on Function 3
CV 272 & CV 372 = 8
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0
Sound 15 is to be shifted from forwards and backwards on Function 3 to Function 8.
The existing function at Function 8 is overwritten in the process.
CV 275 & CV 375 = 0
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0
CV 297 & CV 397 = 0
CV 298 & CV 398 = 0
CV 299 & CV 399 = 0
CV 300 & CV 400 = 4

Controllable Functions

Lighting
1
Sound effect: Long Horn
Sound effect: Squealing brakes off
Sound effect: Short Horn
Front Telex coupler
Rear Telex coupler
Sound effect: Operating sounds
Engineer's cab lighting
Sound on/off
ABV, off
Double A switching light
Sound effect: Compressor
Sound effect: Cab radio
Sound effect: Cab radio
1
active in analog operation
2
with random sounds
Note:
At www.LGB.de you will find a tool you can use to calculate different decoder set-
tings as well an extensive description of the decoder and the settings. Programming
the decoder settings with the 55015 Universal Hand Controller is also explained in
these instructions.
12
1, 2
LV +LR
1
Sound 1
2
BS
3
Sound 2
Sound 14
4
+ AUX 4
Sound 15
5
+ AUX 5
6
FS
7
AUX 3
8
Sound 13
9
10
LV + LR
13
Sound 11
14
Sound 4
15
Sound 5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

21411

Table des Matières