Controllable Functions - LGB 20283 Mode D'emploi

SERVICE
Lubrication
The axle bearings and the side rod bearings should be lubricated occasionally with a
small amount of Märklin-Oil (7149).
Changing Light Bulbs (E130 023)
Lamps (front): Pull the lamp housing from the model. Pull the light bulb plugged
into the socket from the latter. Insert the new light bulb. Re-assemble the model.
Lamps (rear): Unscrew the lamp housing. Pull the light bulb plugged into the
socket from the latter. Insert the new light bulb. Re-assemble the model.
Interior Lighting: Pull the light bulb from the socket using a pair of tweezers.
Insert the new light bulb.

Controllable Functions

1
Lighting
Sound effect: Long whistle blast
Sound effect: Squealing brakes off
Sound effect: Short whistle blast
Sound effect: Bell
Sound effect: Coal being shoveled
Sound effect: Operating sounds
Smoke generator
Sound on/off
ABV, off
Glow from firebox
Sound effect: Whistle sequence before a grade crossing
Sound effect: Compressor
Sound effect: Sanding
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Injector
Sound effect: Blowing off steam
Sound effect: Coupling together (buffer to buffer)
Sound effect: Very long whistle blast
Sound effect: Rail joints
Sound effect: Doors being closed
1
active in analog operation
2
with random sounds
10
1, 2
LV + LR
1 Sound 2
2
3 Sound 1
4 Sound 17
5 Sound 9
6 FS
Susi
7
F7+F16
8
9
10 AUX 1
11 Sound 3
12 Sound 11
13 Sound 19
14 Sound 4+5
15 Sound 22
16 Sound 6
17 Sound 12
18 Sound 14
19 Sound 20
20 Sound 26
21 Sound 21
22 Sound 15