Operation Instructions; On/Off; Function Setting - Gree Versati III Mode D'emploi

2. Operation Instructions

2.1 ON/OFF

[Operation Instructions]
At the menu page, by touching ON/OFF, the unit will be turned on/off.
[Notes]
●It is defaulted to be OFF upon first power-on.
●ON/OFF operation will be memorized by setting "On/Off Memory" to be "On" at the "GENERAL." setting page.
That is, in case of power failure the unit will resume running upon power recovery. Once "On/off Memory" is set to
be "Off", in case of power failure the unit will keep "Off" upon power recovery.

2.2 Function Setting

[Operation Instructions]
1. At the menu page, by touching "FUNCTION", it will go to the function setting page as shown in the figure
below.
2. At the function setting page, by touching the page turning key, it will access to the last or next page. When
setting is finished, by touching the homepage icon, it will directly back to the homepage; by touching the back icon,
it will back to the upper menu.
3. At the function setting page, by pressing the desired function, it will access to the corresponding setting page
of this option.
4. At the function setting page of some function option, by touching "OK", this setting will be saved; by touching
the "CANCEL" key, this setting will be canceled.
[Notes]
●At the function setting page with setting of any function changed, if the function is set to be memorized upon
power failure, this setting will be saved automatically and memorized upon next power-on.
●When there is submenu for the selected function option, by pressing it the control will go directly the setting
page of the submenu.
ON Page
FUNCTION Setting Page
Function Setting
4
Operation Instructions for Versati III