Surface Controls - Jenn-Air JEC0536 Guide D'utilisation Et D'entretien

U Y
SING

Surface Controls

Style varies
by model.
Using the Touch Control
• Press the desired ON pad. A light on the left side of the
control will blink.
• While the light is blinking, press the desired temperature
setting using the Temperature Selector Bar.
• A beep will sound each time a pad is pressed.
Notes
• If a temperature setting is not selected within approxi-
mately 10 seconds, the element will automatically shut
off.
• To change the temperature setting while cooking with
one element, select a new temperature on the Tempera-
ture Selector Bar.
• To change the temperature setting when multiple
elements are on, press the ON pad for the desired
temperature setting, then select a new temperature on
the Temperature Selector Bar.
Setting the Controls
1. Place pan on surface element.
2. Press ON.
3. Select the temperature setting using the Temperature
Selector Bar.
4. When cooking is completed, press OFF and remove the
pan.
C
OUR OOKTOP
Suggested Heat Settings
The size, type of cookware and cooking operation will affect
the heat setting. For information on cookware and other
factors affecting heat settings, refer to "Cooking Made
Simple" booklet.
SETTINGS
Ultra High Offers higher speed cooking that can be
used to quickly bring water to a boil,
searing, blackening and for large-
quantity cooking.
High Use to bring liquid to a boil. Always
reduce setting to a lower heat when
liquids begin to boil or foods begin to
cook.
6-8 Use to brown meat, heat oil for deep fat
(medium high) frying or sauteing. Maintain fast boil for
large amounts of liquids.
4-6 Use to maintain slow boil for large
(medium) amounts of liquids and for most frying
operations.
2-4 Use to continue cooking covered foods
(medium low) or steam foods.
Low Use to melt butter or chocolate.
Ultra Low/ Offers a lower temperature for cooking
Warm delicate sauces without scorching. Use
to keep cooked foods warm.
4
Temperature
Selector Bar
USES