Zyxel P-335U Guide Rapide page 7

Note: Your wireless clients must support WPA-PSK and use the same key.
• None: Have no wireless LAN security configured. If you do not enable any wireless security on your P-335U,
your network is accessible to any wireless networking device that is within range.
• Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless net-
work. The higher the WEP Encryption, the higher the security but the slower the throughput.
• Extend (WPA-PSK or WPA2-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wire-
less clients support WPA-PSK or WPA2-PSK respectively.
Note: The wireless clients and P-335U must use the same SSID, channel ID and WPA(2)-PSK (if
WPA(2)-PSK is enabled) or WEP encryption key (if WEP is enabled) for wireless communication.
OTIST
• OTIST (One-Touch Intelligent Security Technology) allows your P-335U to assign wireless clients the P-335U's
SSID and static WEP or WPA-PSK encryption settings. The wireless client must also support OTIST and have
OTIST enabled.
Auto or No Wireless Security
A Enter a unique name to identify the P-335U in the wireless LAN.
B Select a level of wireless security. Choose Auto or None.
C The P-335U automatically scans for and selects a channel not in use by a nearby device. The P-335U and
wireless client must use the same channel ID.
D Yes is selected by default. Select the No radio button if you don't want to use OTIST now or your wireless
clients don't support OTIST. If you set Security to Auto, OTIST must be enabled.
E The default OTIST Setup Key is "01234567". This key can be changed in the OTIST screen. Be sure to use
the same OTIST Setup Key on the P-335U and wireless clients.
ENGLISH
7