Zyxel P-335U Guide Rapide page 18

lower than High in Internet Explorer (in Internet Explorer, click Tools > Internet Options > Security >
Custom Level...). See the appendix in the User's Guide for more information.
2 If you cannot access the Internet when your computer is connected to the LAN port, follow these steps.
A) Check the lights on the front panel. If they are different than what is described in section 1, make sure
the connections are correct. (See section 1.) If the lights are still different, turn off the device, wait a few
seconds, and turn it on again.
B) Follow the steps in section 3 again. Make sure you enter the correct information. For example, if your
account has a user name and password, make sure you type it correctly. In addition, if you are not sure
which encapsulation your ISP uses, contact your ISP.
C) If you are using a new Internet account, contact your ISP to make sure it is active.
D) If you still have problems, see Troubleshooting in the User's Guide.
3 If you cannot access the Internet using the wireless network, follow these steps.
A) On a computer in the wireless network, open your browser, and go to http://192.168.1.1. If you see the
screen in step 2 of section 2, follow suggestions A - D above. If you do not, go to the next step.
B) Make sure the AG switch (on the rear panel) is set to the G side if your wireless clients support IEEE
802.11b or IEEE 802.11g and set to the A side if your wireless clients support IEEE 802.11a only.
C) Make sure your P-335U and your computer are using the same wireless and wireless security settings.
Follow the steps in section 3.
4 If you cannot print anything using the USB printer connected to the P-335U, follow these steps.
A) Make sure you install the print server driver on your computer; see section 4.
B) Verify that the printer uses USB 1.1 or 1.0 by checking your printer's specifications.
C) Make sure the USB printer is powered on and can work properly.
D) Check the USB cable connections.
Set Up Your Computer's IP Address
This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.
This ensures that your computer can communicate with your P-335U. Refer to your User's Guide for detailed
IP address configuration for other Windows and Macintosh computer operating systems.
1 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.
2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up
Connections.
ENGLISH
18