Maintenance And Repairs; General; Cleaning; Charging The Machine's Battery - Husqvarna HTC 950 RX Manuel De L'opérateur

Maintenance and repairs

5 Maintenance and repairs
5.1

General

We recommend regular inspections of all seals.
Warning!
Disconnect the electrical supply when cleaning, carrying out maintenance,
changing tools or repairing the machine.
Warning!
Use protective equipment according to the label on the machine.
Warning!
During electro-welding work on the machine, the radio receiver must always be
disconnected to avoid damage to the receiver's electrical system.
5.2

Cleaning

Warning!
Do not rinse off the machine using a high-pressure washer, as moisture can
penetrate to the electrical parts and damage the drive system.
• Vacuum clean the control cabinet, if required.
• Always clean the machine after use with a damp sponge or cloth.
5.3

Charging the machine's battery

Warning!
During charging, oxyhydrogen gas always forms in the battery. An open flame
or spark in the vicinity of the batteries could cause an explosion.
The battery that drives the motors for the machine's drive wheel is charged continuously
as long as the machine is connect to the mains.
5.4

Charging/replacing the radio control unit's batteries

Warning!
During charging, oxyhydrogen gas always forms in the battery. An open flame
or spark in the vicinity of the batteries could cause an explosion.
34
HTC 950 RX
5.0