Table Des Matières - Dolmar PS-9010 Manuel D'emploi Et De Sécurité

Careless or improper use of this product can cause serious or even fatal injury.
Before operating a chain saw or other DOLMAR products it is important that you read, fully understand and
carefully follow the instructions outlined in this owners manual. Kickback may cause severe or fatal injury and
is one of many potential dangers in operating a chain saw. Kickback and other safety related precautions are
described in detail within this owners manual. Additional owners manuals are available from DOLMAR POWER
PRODUCTS, PO Box 5007, Alpharetta, GA, 30005-5007, USA, Telephone 1-888-OPE-PART.
This product complies with: American National Standard Institute B 175.1-2000 chain saw safety standard.
With the purchase of this chain saw you have chosen a German quality product. Important instructions for
the assembly and operation of this saw are given in this manual. For your own safety, we ask you to read the
accident prevention instructions very carefully before putting your chain saw into operation, as incorrect hand-
ling can, despite all precautions, lead to accidents. With a little care and attention you will have good service
and lasting satisfaction from this first-rate product. The following industrial property rights apply: US 5411382,
EP 0440827, EP0560201, GBM 8909508, GBM 8913638, GBM 9203378.
Contents
Packing ............................................................................... 3
Delivery inventory ............................................................. 4
Symbols ............................................................................... 4
SAFETY PRECAUTIONS ...............................................5-6
Denomination of components ......................................... 17
Technical data ................................................................... 8
PUTTING INTO OPERATION .......................................9-24
Mounting the guide bar and saw chain ................................ 9
Tightening the saw chain ..................................................... 20
Chain brake ......................................................................... 20
Fuels / Refuelling ................................................................. 2
Adjusting the chain lubrication ............................................. 22
Starting and stopping the engine ......................................... 23
Checking the chain brake ................................................... 23
Checking the chain lubrication............................................. 23
Adjusting the carburetor .................................................. 24
Working in winter ............................................................. 24
MAINTENANCE ............................................................25-3
The DOLMAR PS-9010 will be delivered in a protective cardboard box to prevent transport damage. Cardboard
is a basic raw material and is consequently reuseable or suitable for recycling (waste paper recycling).
WARNING !
Canadian Standards Association Z62.-03 chain saw safety standard. Z62.3-04
chain saw kickback standard.
Society of Automotive Engineers
SAEJ 335-Jun 95 „Multiposition small engine exhaust system fire ignition
suppression"
DOLMAR PS-9010
Page
Sharpening the saw chain ..............................................25-26
Cleaning the guide bar ........................................................ 26
Cleaning the chain brake band ............................................ 26
Checking and replacing the sprocket .................................. 27
Replacing / cleaning the spark arrester screen ................... 27
Checking the muffler screws ............................................... 27
Replacing the starter cable .................................................. 28
Replacing the return spring ................................................. 28
Replacing the fuel filter ........................................................ 28
Cleaning the air filter............................................................ 29
Replacing the spark plug ..................................................... 29
Replacing the vibration damper ........................................... 29
Instructions for periodic maintenance .................................. 3
Service, spare parts and guarantee ...........................3-32
Troubleshooting ............................................................... 32
Extract from spare parts list ............................................ 33
Page
3