Using The Iso Connector - Phonocar VM 022 Manuel D'instructions

Using the ISO connector

1. If your car is equipped with the ISO connector,
then connect the ISO connectors as illustrated.
2. For connections without the ISO connectors,
check the wiring in the vehicle carefully before
connecting, incorrect connection may cause
serious damage to this unit. Cut the connector,
connect the colored leads of the power cord
to the car battery, as shown in the colour code
table below for speaker and power cable con-
nections.
ISO Connector
Location
1
2 S.W. Control/Brown
3
4 ACC + / red
5 Auto antenne / Blue
6
7 Battery 12V (+) / Yellow
8 Ground / Black
Connector A
Function
Rear right (+)--- Purple
Rear right (-)--- Purple/Black
Front right (+)--- Grey
Front right (-)--- Grey/Black
Front left (+)--- White
Front left (-)--- White/Black
Rear left (+)--- Green
Rear left (-)--- Green/Black
37
Connector B
GB