Remote Control (Optional) - Phonocar VM 022 Manuel D'instructions

Remote control VM303
7 Button 1: Press briefly for Play/Pause function.
Press for more than 2 seconds if you want to start playback from the beginning of the first track of your
disc.
Button 2: INTRO play (10 sec.)
Button 3: Track repeat play
Button 4: Track random play
Button 5: MP3 track-10 down
Button 6: MP3 track+10 up
1-6 Button: Radio preset
Press to listen to a preset station. Hold for more than 2 seconds to store station.
8 SRC (source):
- Radio - Disc play (when disc inserted) - USB-drive (when USB inserted)
- MEM-card (when SD/MMC inserted) - AUX-IN
9 Radio Tune
To fast search within a track/skip to next or previous track.
10 AMS
RADIO AUTO PRESET
RADIO PRESET scan
MP3 track/file/character search
11 BAND Band switch: FM1 FM2 FM3 MW1 MW2
12 PTY (Program Type)
13 Display switch
Replacing the battery of remote control unit
When the operation range of the card remote control becomes short or no
properly, replace the lithium battery with a new one. Make sure the battery
polarity replacement is correct.
Pull out the battery holder while pressing the stopper.
Insert the button-type lithium battery with the(+) mark facing upward. Insert
the battery holder into the remote control.
(optional)
1 Power On/Off
2 Mute
3 Volume
4 Press to select VOLUME/BASS/TREBLE/ BALANCE/
FADER,use Volume button to adjust level.
Press for more than 2 seconds to Menu Function.
MP3 track/file/character search.
5 Traffic Announcements Identification (TA)
6 REG On/Off
Alternative Frequency (AF)
26
CR 2025