IKEA FINSMAKARE Manuel page 8

ENGLISH
Installation modes
The hood has been designed to be
installed and used either as a "Exhaust
mode", or as a "Recirculation mode".
Exhaust mode (see symbol
in installation booklet)
Cooking steam is sucked and
channelled outside the house
through a discharge duct (not
supplied), fitted to the hood steam
outlet.
Ensure that the discharge duct is
correctly fitted to the air outlet, unit
using an appropriate connection
system.
Recirculation mode (see symbol
in installation booklet)
The air is filtered through one or
more the charcoal filters, and then
resent into room.
Important: Ensure appropriate air
circulation around the hood.
Important: If the hood is supplied
without charcoal filters and installed
on recirculation mode, these must be
fitted before the hood can be used.
Filters are available in shops.
The hood should be installed away
from particularly dirty areas,
windows, doors and heat sources.
The accessories for wall fixing are
not included because wall made of
different materials require different
types of fixing accessories. Use
fixing systems suitable for the walls
of your home and the weight of the
appliance. For more details, contact
a specialized dealer.
Keep this booklet for future
consultation.
Filters Alarm.
When the filter alarm is activated,
the following messages will appear
over time:
Grease filter alarm must be cleaned:
"A" key flashes once per second. For
maintenance see paragraph Care and
cleaning.
Anti-odour filter alarm must be
cleaned: "A" key flashes twice
per second. For maintenance see
paragraph Care and cleaning.
Once the filters have been
regenerated reset the alarm signal
(see paragraph Control Panel).
8