Setting The Ringtone - Gigaset 5040 Mode D'emploi

Adjusting the telephone
To make functions available permanently:
º
Hold down the Set key until you hear the
beep.
Press the associated keys as defined here.
º
Then hold down the Set key again.
To cancel the adjustment, without saving the new set-
ting, e.g. after an incorrect entry, simply replace the
handset if it is off the hook or pick it up if it is on the
hook. The original setting is then retained.
Activating/deactivating the proximity
sensor
The proximity sensor recognizes when someone
approaches the telephone and automatically activates
the display and key lighting.
*
Hold down the Proximity sensor key to acti-
Œ
vate/deactivate the function.
The display shows the
sensor is activated.
Activating/deactivating automatic call pick-
up
An incoming call from a number stored under one of the
Name keys is automatically answered via the handsfree
function when someone approaches the telephone.
Prerequisite: The proximity sensor is activated and the
number is stored correctly (including area code) under
the name key (see page 7).
Note: An automatically answered call is ended like any
other call in handsfree mode (see page 6).
1
Hold down the Automatic call pick-up key
to activate/deactivate the function.
When the automatic call pick-up function is activated,
the symbol for the proximity sensor (
display.
symbol when the proximity
Œ
) flashes in the
8
en
Adjusting the ringer volume
The volume of the ringer can be set to one of 4 levels or
can also be deactivated completely (default setting is
level 4). If the ringtone is deactivated, you can only rec-
ognize incoming calls from the display and the flashing
Calls list key.
To adjust when the telephone is idle:
º5
Hold down the Set key, then press the
number 5 key.
H I
... Adjust the volume with the Loud/Quiet key.
º
Hold down the Set key.
To adjust while the telephone is ringing:
H I
Press ... before lifting the handset.
The last value set is saved.
Setting the ringer frequency
The frequency (speed) of the ringer can be set to one of
3 levels (default setting is level 3).
º6
Hold down the Set key, then press the num-
ber 6 key.
1 3
...
Press one of the keys 1, 2 or 3:
1: lowest frequency;
º
3: highest frequency.
Hold down the Set key.

Setting the ringtone

Ten different ringtones can be set for the ringer (default
setting is ringtone 9).
To set when the telephone is idle:
º7
Hold down the Set key, then press the num-
ber 7 key.
0 9
... Press one of the keys 0 through 9.
º
Hold down the Set key.