Setting The Internal Clock - Gigaset 5040 Mode D'emploi

Preparing the telephone for use
Installing the telephone
◆
Do not expose the telephone to direct sunlight or
other sources of heat.
◆
Operate at temperatures between +41°F and
+113°F.
◆
Maintain a distance of at least one metre between
the telephone and radio equipment, e.g. wireless
telephones or pages, or TV sets. This could impair
telephone communication.
◆
Do not install the telephone in dusty areas as this can
shorten the service life of the telephone.
◆
To clean, wipe with a moist or antistatic cloth only,
never with a dry cloth (risk of electrostatic charging
and discharge) or harsh cleaning agent.
◆
Use caution when using furniture lacquer or polish,
since contact can damage parts of the unit (e.g. the
device feet).
Connecting
1 Insert the short end of the coiled handset cord in the
socket provided in the handset and the long end in
the socket marked with an
the device.
2 Plug the phone cord into the outlet on the wall and
the other end into the socket marked
underside of the device.
3 Plug the power adapter cable into the power supply
socket on the underside of the device and plug the
adapter itself into a power socket.
Your telephone is now ready to use.
a
on the underside of
Y
on the
5
en
If the power supply is not plugged, the display and key-
pad illumination, with the exception of Loudspeaker
key, doesn't work.

Setting the internal clock

º3
Hold down the Set key, then press the num-
ber 3 button.
The current set time displays in 12-hour for-
mat (default setting is 12:00 A).
Press the Star key to toggle between A (AM)
o
and P (PM).
Enter the time in hours <hh> and minutes
º
<mm> (12-hour mode).
Hold down the Set key.
If the task was successful you will hear a positive confir-
mation tone.