Kobalt KMP 2080A-06 Mode D'emploi page 15

Tondeuse autotractée avec plateau de 53,34 cm, 80v
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ASSEMBLY INSTRUCTIONS
2. Removing the mulching plug
To remove the mulching plug (B), lift the rear dis-
charge door (J).
Grasp the handle of the mulching plug (B). Using
this handle, lift and pull the mulch plug out.
The mulching plug (B) is inserted at an angle, so it
requires some force to remove.
The mulching plug (B) must be removed in order to
install the grass catcher bag.
The mulching plug (B) must be re-installed when
the grass catcher bag is removed.
3. Installing the grass catcher bag
Lift the rear discharge door (J).
Lift the grass catcher (C) by its handle and place
under the rear discharge door so that the hooks on
the grass catcher are seated on the door rod.
Release the rear discharge door (J). When installed
correctly, the hooks on the grass catcher will extend
through the openings on the rear discharge door.
4. Installing the side discharge chute
Lift the side discharge cover (I).
Align the grooves on the side discharge chute (D)
with the pins on the underside of the side discharge
cover (I).
Lower the side discharge chute until the hooks on
the mower deck are secured in the openings of the
side discharge chute.
Release the side discharge cover.
Ensure the mulch plug is installed for side discharge
to operate correctly.
2
J
B
3
C
4
I
D
15
J

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

0876365

Table des Matières