Kobalt KMP 2080A-06 Mode D'emploi page 12

Tondeuse autotractée avec plateau de 53,34 cm, 80v
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY INFORMATION
SERVICE
Servicing requires extreme care and knowledge and should be performed only by a qualified service
technician. For service, it is suggested you return the product to your nearest AUTHORIZED SER-
VICE CENTRE for repair. When servicing, use only identical replacement parts.
Slope gauge
WARNING
Slopes are a major factor related to accidents involving slips and falls, which can result in severe
injury. Operating the mower on a slope requires extra caution. If you feel uneasy on a slope, do not
mow it. For your safety, use the slope gauge that is included as part of this manual to measure slopes
before operating this unit on a sloped or hilly area.
Mow across the face of a slope, and never up and down. Exercise extreme caution when chang-
ing direction on a slope.
Watch for holes, ruts, rocks, hidden objects, or bumps that may cause a slip or a trip. Tall grass
can hide obstacles.
Always be sure of your footing. If you feel like you are losing your balance, release the blade/mo-
tor control handle immediately. The blade will stop rotating within 3 seconds.
Do not mow near drop-offs, ditches, or embankments, because you could lose your footing or
balance.
Do not mow a slope that has an angle of greater than 15°, as determined using the slope gauge.
Do not mow wet or damp grass. Unstable footing can cause slipping.
WARNING
Do not mow a slope that has an angle of greater than 15° (a rise of approximately 2-1/2 ft. every 10
ft.). Mow across the face of a slope, and never up and down.
12

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

0876365

Table des Matières