Trademarks; Description; Product Overview; Gas Detector - Dräger X-pid 8x00 Notice D'utilisation

2.3

Trademarks

Trademark Trademark holder
® bentekk GmbH | A Dräger Company
X-pid
Bluetooth SIG, Inc.
®
Bluetooth
ECOM Instruments GmbH
®
Smart-Ex
The trademarks cited are only registered in certain countries and not
necessarily in the country where this material has been published.
3

Description

3.1

Product overview

3.1.1

Gas detector

The Dräger X-pid xx00 gas detector consists of 3 components:
– Dräger X-pid xx00 sensor unit (referred to below as the "sensor unit")
– Dräger X-pid xx00 mobile app (referred to below as the "mobile app")
– Explosion-proof smartphone (referred to below as the "control unit")
The Dräger X-pid xx00 is a portable gas detector for clearance measurements
for hazardous substances in explosion-hazard areas at the workplace.
Occupational exposure limits for benzene and other toxic and carcinogenic
volatile organic compounds (VOCs) can be monitored using the gas detector.
The metrology and sensors are located in the sensor unit, from which
measurement data is transmitted to the control unit via Bluetooth, and
evaluated and displayed in the mobile app.
Dräger X-pid
®
8x00 Sensor Unit
The gas detector has one measurement mode:
Measurement mode Explanation
Analysis Selective measurement of previously selected individ-
ual substances, known as target substances, in a
matter of seconds (discontinuous). For example, the
"Analysis" enables the concentrations of benzene
and butadiene to be individually displayed after 30 s
with a high level of accuracy. The measurement mode
is comparable to GC analyses in the laboratory.
For further information, see the following chapter: "Measurement in Analysis
measurement mode", page 11.
Description