MINN KOTA TALON Manuel Du Propriétaire page 2

THANK YOU
Your new Talon Tilt Bracket is designed to allow easy tilting when needed. These conditions include low hanging obstacles or backing in
and out of low overhead clearances. The tilt feature may also be used to extend your Talon for easy cleaning purposes.
REGISTRATION
Remember to keep your receipt and immediately register your
Talon. To receive all the benefits of your product warranty
please fill out and mail the registration card, you may also
register your product online at minnkotamotors.com.
SERIAL NUMBER
Your Minn Kota 11-character serial number is very important. It
helps to determine the specific model and year of manufacture.
When contacting Consumer Service or registering your product,
you will need to know your product's serial number. We
recommend that you write the serial number down so that you
have it available for future reference.
NOTICE:
The serial number on your Tilt Bracket is
located on the inside of the bracket, near the latch pin.
TALON INFORMATION
Model: _________________________________________________________________________________________________________________
Serial Number: __________________________________________________________________________________________________________
Purchase Date: __________________________________________________________________________________________________________
Store Where Purchased: __________________________________________________________________________________________________
2 | minnkotamotors.com
INTRODUCTION
(For Consumer Reference Only)
Made by Minn Kota
Talon Tilt Bracket
Johnson Outdoors
EXAMPLE
MODEL 1810222
Marine Electronics, Inc.
121 Power Drive
Mankato, MN 56001 USA
Trolling Motors
Produced in 2012
SER NO M365 MK12345
EXAMPLE
©2019 Johnson Outdoors Marine Electronics, Inc.