Maintaining The Product - TESTO 606-1 Mode D'emploi

16 Using the product
 Press
 Testing the instrument function:
 Changing the display view:
   P ress
 Switching the instrument off:
   P ress

Maintaining the product

 Changing batteries:
 Cleaning the housing:
   C lean the housing with a moist cloth (soap suds) if it is dirty.
Quality Testo Products Online at:
several times until the desired material characteristic
curve appears.
1 Press several times until
2 Connect sensing electrodes with the contacts of the test
resistor on the top of the protection cap.
Test
- flashes.
Test: ok
- lights up: instrument is functioning.
Test: ok
does not light up: test not possible, see chapter
‚Tips and assistance'.
3 Press back to measurement menu.
· Current reading
· Hold: Readings are held.
until the desired view appears.
and hold until the display goes out.
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
Do not use aggressive cleaning agents or solvents!
GlobalTestSupply
www.
Test:
lights up.
.com
sales@GlobalTestSupply.com