Using The Different Functions; Switch Off The Appliance - Brandt TI1FSOFT Manuel D'instruction

c) Using the different functions
 Timer
To use the timer, press first the power regulating control + and then press the timer button
(2). The digital screen will indicate « 00:00 ». During the next 4 seconds, press on the +/-
pads to adjust the cooking time. Each pressure increases or decreases the time of 1 minute.
If you maintain the button longer, the time will increase or decrease by increments of 10
minutes. The timer can be set from 1 minute to 180 minutes. Once the time is set, the digital
screen will flicker during 5 seconds before heating. To cancel the timer function, press again
on the timer button (2).
 Keep warm mode
To keep your food preparation to serving temperature, press on the Keep warm button (5).
The appliance will set automatically on the lowest power 1 and will stop after 120 minutes.
To set again the power, press directly on the +/- buttons. Then, if you want to increase the
power press on the + button. The power level increases on the display and the Keep Warm
mode is automatically deactivated.
 Child lock mode
To lock the control pads during the cooking, press on Child lock button(1). The
indicator<<Lo>> will appear on the screen. In this case, only the On/Standby button(6) can
be used to switch off the appliance. If you press the On/Standby button while in child lock
mode, the screen will show 'H' or 'L', and the appliance is OFF. To unlock the control panel,
press On/Standby button again and then press again on "lock" button during 3 seconds.
d) Switch off the appliance
After use, the electric hob is hot, the buzzer rings and the indicator « H » flashes on the
screen. -H- indicates that the temperature of the cooking zone is more than 60 degrees.
To switch off the appliance, press on the On/Standby button (6), and then unplug the
socket.
Please, refer below table for wattage:
25