Toro Turf Pro 6 Mode D'emploi page 5

What the Buttons and Switches Do
Function Switch
• Use Run for automatic operation.
• Use Set Program
• Use Off to cancel all active watering or suspend all planned watering.
Semi-Auto/Manual Button
• Manually starts an automatic program (semi-auto) or an individual valve.
Next Button
• Advances to the next option for setting time/date and special features.
Rotary Dial
• Sets changes or checks program information.
+/-
(Plus/Minus) Buttons
• Changes the values of program information. Can be used one step at a
time or held down longer to rapidly advance to another setting.
Holding down either button for longer than 3 seconds causes the display to
rapidly scroll through the digits.
Display
• Shows the value of the selected information.
Time
• Sets the correct time of day on the controller. Note the AM/PM display.
Date
• Sets the correct year, month and day on the controller.
Rain Sensor Switch (located on the circuit board)
• Bypass position disables rain sensor function and allows the controller to
operate without a rain sensor connected.
to set programs and select special features.
5