Stop Watering; What The Display Means - Toro Turf Pro 6 Mode D'emploi

Stop Watering

1.Set the Function Switch to OFF. After 3 seconds, all watering stops.
• Suspends but does not erase programs.
• The display flashes "OFF".
Note: Watering remains off in this Function Switch position. Set the Function
Switch to RUN to resume all automatic schedules.

What the Display Means

Information Displayed When Changing Settings
With the Function Switch set to SET PROGRAM, each Dial position shows:
Time
Displays the current time in hours and
minutes, and indicates AM or PM.
Date
Displays the current date as year, month
(JAN - DEC), or date.
Valve Run Times
The selected watering time is displayed in
minutes, e.g., 10 MIN, or in hours, e.g., 1.9
HR ( the same as 1 hour and 54 minutes).
If no watering time is programmed for the
valve, "OFF" is displayed.
Start Times
The selected start time is displayed in
hours, minutes and AM/PM. If a start time
has not been selected or is removed,
"OFF" is displayed.
Daily Schedule
Each day of the week dial position displays
either "ON" or "OFF". If "SKIP DAYS"
has been selected, the word "SKIP"
followed by three dashes is displayed for
each of the 7 watering day settings. If an
odd or even schedule is in effect, "ODD"
or "EVN" is displayed.
17