Compliance With Standards - Philips HQ7895 Mode D'emploi

- The shaver, the Jet Clean system and the other accessories are not
dishwasher-proof.
- Only use the adapter supplied.
- If the adapter is damaged, always have it replaced with one of the
original type in order to avoid a hazard.
Only use the Jet Clean systemwith the original HQ200 cleaning luid.
-
- Do not immerse the Jet Clean system in water nor rinse it under the
tap. (Fig. 4)
- Use and store the Jet Clean system at a temperature between 5°C
and 35°C.
- Always place the Jet Clean system on a stable, level and horizontal
surface to prevent leakage.
Always place the Jet Clean system on a luid-resistant surface.
-
- When the Jet Clean system is ready for use, do not move it to prevent
leakage of cleaning luid.
- The Jet Clean system thoroughly cleans but does not disinfect your
shaver, therefore do not share the shaver with others.

compliance with standards

- The shaver complies with the internationally approved IEC safety
regulations and can be safely cleaned under the tap (Fig. 5).
- The shaver and the Jet Clean system comply with all standards
regarding electromagnetic ields (EMF). If handled properly and
according to the instructions in this user manual, the appliances are
safe to use based on scientiic evidence available today.
general
- The adapter transforms 100-240 volts to a safe low voltage of less
than 24 volts.
EnglisH
7