Compliance With Standards - Philips AT940 Mode D'emploi

ENGLISH
8
- Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.

Compliance with standards

- This shaver is waterproof and complies with the
internationally approved safety regulations. It is
suitable for use in the bath or shower and for
cleaning under the tap. For safety reasons, the
shaver can therefore only be used cordlessly.
- The shaver complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
General
- The adapter is equipped with an automatic
voltage selector and is suitable for mains voltages
ranging from 100 to 240 volts.
- The adapter transforms 100-240 volts to a safe
low voltage of less than 24 volts.
- Maximum noise level: Lc = 69dB(A)
Charging
Note: The shaver cannot be used directly from the
mains.
AT940/AT928/AT921/AT893/AT890: It takes approx.
1 hour to fully charge the shaver.
AT752/AT750: It takes approx. 8 hours to fully
charge the shaver.
A fully charged shaver provides up to 60 (AT940/
AT928/AT921), 50 (AT893/AT890) or 40 (AT752/
AT750) shaving minutes.
The shaving time may be less than expected as
a result of your shaving behaviour, your cleaning
habits or your beard type.