Cleaning The Trimmer - Philips HQ7895 Mode D'emploi

Extra-thorough cleaning method
Switch off the shaver, remove the adapter from the wall socket and
1
pull the appliance plug out of the shaver.
Open the shaving unit, turn the lock anticlockwise (1) and remove
2
the retaining frame (2) (Fig. 28).
Clean the cutters and guards with the brush supplied (Fig. 29).
3
Note: Do not clean more than one cutter and guard at a time, since they are
all matching sets. If you accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving performance is restored.
Put the shaving heads back into the shaving unit. Put the retaining
4
frame back into the shaving unit and turn the lock clockwise (Fig. 30).
Close the shaving unit.
5

cleaning the trimmer

Clean the trimmer every time you have used it.
Switch off the shaver, remove the adapter from the wall socket and
1
pull the appliance plug out of the shaver.
Clean the trimmer with the brush supplied (Fig. 31).
2
3 Lubricate the trimmer teeth with a drop of sewing machine oil
every six months (Fig. 32).
storage
There are two ways to store the shaver:
- put the protection cap on the shaver to prevent damage (Fig. 12).
- store the shaver in the Jet Clean system (Fig. 33).
replacement
For optimal shaving performance, we advise you to replace the shaving
heads every 2 years.
Replace damaged or worn shaving heads with HQ8 Philips Shaving
Heads only.
EnglisH
13