Accessories - Philips HQ7895 Mode D'emploi

EnglisH
14
Note: Do not mix up the cutters and the guards to guarantee optimal
shaving performance.
Switch off the shaver, remove the adapter from the wall socket and
1
pull the appliance plug out of the shaver.
Press the release button to open the shaving unit.
2
Turn the lock anticlockwise (1) and remove the retaining frame
3
(2) (Fig. 28).
Remove the shaving heads and place new ones in the shaving unit.
4
Put the retaining frame back into the shaving unit and turn the lock
clockwise (Fig. 34).
Make sure that the projections of the shaving heads it exactly into
the recesses.
Close the shaving unit.
5

accessories

The following accessories are available:
- HQ8 Philips Shaving Heads.
- HQ110 Philips Shaving Head Cleaning Spray.
- HQ8010 Car Cord.
- HQ200 Philips Cleaning Fluid.
Environment
- Do not throw away the shaver and the Jet Clean system with the
normal household waste at the end of their life, but hand them in at
an oficial collection point for recycling. By doing this, you help to
preserve the environment (Fig. 35).
- The built-in rechargeable shaver battery contains substances that may
pollute the environment. Always remove the battery before you
discard and hand in the shaver at an oficial collection point. Dispose
of the battery at an oficial collection point for batteries. If you have
trouble removing the battery, you can also take the shaver to a Philips
service centre. The staff of this centre will remove the battery for you
and will dispose of it in an environmentally safe way (Fig. 36).