Product Opening; Slide Removal - Videotec MAXIMUS MLX Manuel D'instructions

6.2 Product opening

Before carrying out any type of
intervention, read the "Safety rules"
chapter of this manual.
Unscrew the fastening screws and remove the front
cover from the housing body.
Screws properties
• Diameter/Screw pitch: M5x0.8
• Material: A4
• Screw head: ISO 4762
• Length: 8mm (0.3in)
• Yield stress (min): 450N/mm²
Fig. 14
MNVCMLX_2222_EN

6.3 Slide removal

Unscrew the 3 M4 screws to remove the slide.
Before removing the slide, check that cables are not
fastened with a clip.
Fig. 15
17