Troubleshooting; Technical Data; General; Mechanical - Videotec MAXIMUS MLX Manuel D'instructions

11 Troubleshooting

Before carrying out any type of
intervention, read the "Safety rules"
chapter of this manual.
Contact an authorised support centre if
the problems persist or you have any other
issues that are not described here.
PROBLEM The product does not go on.
CAUSE Wrong cabling, broken fuse.
SOLUTION Make sure the connections are
correct. Check continuity of the
fuse and, if faulty, replace it with
the indicated model.
PROBLEM The illuminator reduces in
intensity.
CAUSE In high ambient temperatures,
the illuminator automatically
reduces the brightness flow.
SOLUTION Do not intervene. To reduce
the temperature, the system
will automatically restart the
illuminator.
PROBLEM The illuminator flashes every
10s.
CAUSE LED fault.
SOLUTION Contact the authorized service
centre.
24

12 Technical data

12.1 General

Beam patterns: 70°, circular
Number of LED groups selectable: 2
LECC: The "LED Energy Consumption Control"
technology allows the illuminator to withstand
high temperatures and so ensure the LEDs operate
correctly for the entire life of the product.
Illuminator with IR type LED
• Wavelength: 850nm
• LED: 11
• Viewing distance: up to 125m (410ft) with
VIDEOTEC cameras with DELUX technology
Illuminator with white light LED
• Light color temperature: 6500K
• LED: 10
• Viewing distance: up to 125m (410ft) with
VIDEOTEC cameras with DELUX technology

12.2 Mechanical

AISI 316L stainless steel construction
External shot peened and electro-polished surfaces
Supports for wall, ceiling or parapet installation
Cable entry: 1 hole, 1/2" NPT
Unit weight:
• 6.5kg (14.3lb)

12.3 Electrical

Supply voltage/Current consumption
• 24Vac, 1.6A
• 24Vdc, 1.6A
• PoE+ (IEEE 802.3at)
Power consumption:
• 25.5W

12.4 I/O interface

Number of inputs for LED groups management: 2
Fault Relay: 1A, 30Vac/60Vdc max
MNVCMLX_2222_EN