Identification; Product Description And Type Designation; Product Markings; Preparing The Product For Use - Videotec GEKO IRH Manuel D'instructions

4 Identification

4.1 Product description and type
designation
The GEKO lights the entire scene evenly, eliminating
hotspots and underexposures, for unbeatable
night-time images and secure surveillance of the
area. The high efficiency heat sink body ensures
maximum LED durability and protection against
over-temperatures, whereas the front glass, made
of special technopolymer, provides high infrared
transmittance (transparent glass in the white light
version). The GEKO illuminators are protected against
electrostatic discharges.
The illuminators can be powered at 12Vdc to 24Vdc
or at 24Vac.
The power supply in a waterproof box, in 230Vac or
120Vac version, is available as an accessory for one or
two GEKO illuminators.
GEKO is supplied with a wall-mount bracket that
rotates horizontally and vertically and can be
assembled in a housing by means of the OSUPPIR
bracket.
The GEKO infrared illuminator guarantee is 5 years,
while for GEKO with the white light is 2 years.

4.2 Product markings

See the label attached to the product.
MNVCIRHS_1511_EN
5 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.

5.1 Unpacking and contents

5.1.1 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
If there are obvious signs of damage, contact the
supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
5.1.2 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Illuminator with bracket
• Wall-fastening bracket
• Instructions manual
5.2 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.
5