Troubleshooting - RELAXXNOW VTX200 Manuel

17. TROUBLESHOOTING

If the fan stops working, please follow these steps before contacting customer service:
PROBLEM
The fan does not turn on.
The fan has stopped sud-
denly.
The oscillation function does
not work.
The fan is on, but the air
power is not strong enough.
The remote control
does not work.
48
RELA NOW
POSSIBLE CAUSE
Fan is not connected
Plug it into the appropriate outlet and
to a 220-240V AC,
turn it on again.
50/60 Hz outlet.
The timer has expi- Make sure all the timer lights on the
red and the fan has control switch are off. When one of
switched off automa- the lights is lit, press the „Timer"
tically. button until all LEDs are off.
Make sure that the corresponding
The oscillation func- Oscillating function LED is lit. If not,
tion was not switched press the button to start the function.
on. This can also be done while the fan
is in operation.
Turn off the fan and pull out the plug.
Dust has collected on Clean the rear grille with a soft, dry
the back of the fan. cloth. Plug in the plug and turn it
back on.
The batteries are too
weak. Follow the operation of the remote
The remote is too control and the guidelines for using
far away from the the remote control batteries.
device.
SOLUTION