Transport And Storage; Cleaning And Maintenance - RELAXXNOW VTX200 Manuel

15. TRANSPORT AND STORAGE

Improper storage could damage the device.
Please note the following important warnings.
• Be sure to disassemble and clean the fan before storage.
• Retain the original packaging for storing the fan.
• Always keep the fan in a dry place.
• Never store the fan when it is still connected to the power.
• Never wrap the cable tightly around the fan.
• Never strain the cable at the point where it connects to the fan, otherwise it could fray or
tear.
BEFORE transportation / BEFORE storage:
1. Turn off the power and unplug the power cord from the wall outlet.
2. Always pull directly on the mains plug, not on the mains cable.
AFTER relocation of the device:
3. ALWAYS position the device upright.

16. CLEANING AND MAINTENANCE

• Before you clean the fan, it is important to make sure that the device is switched off and
the adapter is unplugged from the socket!
• Clean the device at regularly.
• Clean the propeller and protective grids with a soft, damp, lint-free cloth and then dry.
• Do not use aggressive cleaning agents (such as thinner, alcohol or other chemical
liquids) to clean the fan.
• Tighten visible screws at regularly.
ATTENTION:
DO NOT ALLOW WATER INTO THE FAN. THIS CAN CAUSE A FIRE OR ELECTRIC SHOCK.
THE FAN MOTOR IS FACTORY LUBRICATED FOR ITS ENTIRE LIFETIME AND DOES NOT
NEED ANY LUBRICATION. NO ADDITIONAL MAINTENANCE BY THE USER IS EITHER
REQUIRED OR RECOMMENDED.
EN
47
RELA NOW