Whirlpool Super Capacity 465 YSF377PEG Guide D'utilisation page 21

U
SING THE ELECTRONIC
3. Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F (177°C). Press
temperature or to lower the temperature in
5°F (3°C) amounts. Use these pads until the
temperature you want shows on the display.
4. Press COOK TIME.
The cook time indicator light will light up.
5. Set the cook time.
Press the "up" (s) or "down" (t) pad(s) until the
correct time shows on the display.
6. Press START TIME.
The start time/delay indicator light will light up.
7. Set the start time.
Press the "up" (s) or "down" (t) pad(s) until
the correct time shows on the display.
The example at the right shows a chosen
start time of 2 o'clock. The oven will shut off
by itself at 2:30 (the set start time plus the set
cook time).
8.Press START/ENTER.
NOTE: You can change the temperature or
time settings any time after pressing START/
ENTER by repeating Steps 2 through 7.
MEALTIMER
*
PRESS
to raise the
TIME
PRESS
COOK
TIME
PRESS
TIME
PRESS
START
TIME
PRESS
TIME
PRESS
START
ENTER
5 SEC
CONTROL
.
( CONT )
YOU SEE
(example shows bake at
375°F [191°C])
YOU SEE
YOU SEE
(example shows 30-minute
baking/roasting time)
YOU SEE
YOU SEE
(example shows 2 o'clock
start time)
YOU SEE
continued on next page
USING YOUR RANGE
ON
ON
ON
ON
ON
ON
21