Installation - GoodHome hyana 500W Mode D'emploi

Installation

POSITION AND INSTALLING
• The appliance is designed to heat domestic rooms or similar. It must not be used for other purposes.
• The appliance must be used permanently mounted on a wall as described in the instructions.
• In bathrooms (with bath or shower), install the appliance outside zone 1.
• For radiators already fitted with power plugs, see warning sentence on the page 33.
• Never install the appliance:
— immediately below or in front of a power socket or a junction box. Make sure the power cable is not in contact with the appliance
— in contact with the wall or floor
— near curtains, flammable or combustible materials or pressure vessels.
• Make sure there are no pipes or electric wires in the wall which could be damaged while mounting the appliance.
• Screws an wall plugs are not supplied. The screws and wall plugs used for fixation have to be adapted to the wall on which the appliance will be installed.
Do not use adhesive as means of fixation.
• During installation, make sure the power cable is disconnected from the power line.
29 542
600
29
Min 150 mm
Min 600 mm
25