Technical Data / Time Setting; Time Setting - Ulysse Nardin UN-320 Mode D'emploi

TECHNICAL DATA
Type
Size
Diameter of movement
Height of movement
Number of jewels
Oscillations
Power reserve
Display

TIME SETTING

Pull the crown out to position C. To allow accurate setting,
the second hand will stop (stop seconds function). Make sure
the hands properly showing either am or pm, otherwise the
date will change at noon instead of midnight. Turn the hands
clockwise to the desired time. On the hour signal, push the
crown back to position A.
Mechanical self-winding movement
with silicium technology.
11 .
3/4'''
26.40 mm.
4.60 mm.
39.
28,800 V/h (4Hz).
48 hours.
Small seconds hand decentred at
6 o'clock, date.
5