Time Setting; Date Setting - Ulysse Nardin UN-118 Mode D'emploi

TIME SETTING

Unscrew and pull the crown out to position D. Make sure the hands
are properly showing either am or pm, otherwise the date will
change at noon instead of midnight. Turn the hands clockwise to
the desired time. Push the crown back to position B, then press
slightly to engage the threads and turn to screw the crown down.
The water-resistance can only be guaranteed when the crown is
correctly screwed down.

DATE SETTING

Unscrew the crown and pull out to position C. Rotate in any direction
until the required date appears in the window.
POWER RESERVE INDICATOR
The self-winding movement is fully wound when the hand on the
counter at 12 o'clock is on position "UP". The movement has a
power reserve of approximately 60 hours.
ULYSSE NARDIN CERTIFICATION
Unlike the COSC certificate Ulysse Nardin's certification does not
only certify the movement performance but the timepiece as a
whole (after setting the dial and hands and encasing). Its rigid tests
are a testimonial to the skills of Ulysse Nardin's watchmakers and
engineers.
5