Time Setting; Date Setting; Technical Data - Ulysse Nardin Diver 42mm Mode D'emploi

TIME SETTING

Unscrew and pull the crown out to position D. Make sure the hands
are properly showing either am or pm, otherwise the date will
change at noon instead of midnight. Turn the hands clockwise to
the desired time. Push the crown back to position B, then press
slightly to engage the threads and turn to screw the crown down.
The water-resistance can only be guaranteed when the crown is
correctly screwed down.

DATE SETTING

Unscrew the crown and pull out to position C. Rotate in any direction
until the required date appears in the window.
PRECISION
Precision and average daily rate depend on the activity of the per-
son wearing the instrument. Magnetic fields (computers, mobile
phones, etc.) may influence the working of a watch. Violent shocks
or knocks - quite common in tennis or golf − should be avoided to
prevent shaking that may loosen certain parts.
MAINTENANCE
All mechanical watches should have their movements cleaned and
the oil replaced every 3-5 years. The life span of any mechanical
timepiece will primarily depend upon both daily care and the
recommended routine maintenance. We strongly encourage
you to have your timepiece serviced only at officially authorized
Ulysse Nardin Customer Service Centers. For additional infor-
mation regarding Customer Service please visit our website :
ulysse-nardin.com.

TECHNICAL DATA

Caliber
Diameter
Power reserve
Water resistance
UN-816 - Self-winding movement
42mm
Approx. 42 hours
300m
5