Installation - Kenwood STZ-RF200WD Manuel D'instructions

Installation

Inserting and removing the SD card
Inserting an SD card
1. Open the side door to access the SD card slot.
2. Press the SD card into the SD card slot until you hear a click, then close the side door.
• Always turn the unit off before inserting or removing an SD card.
• We strongly recommend using the unit to format SD cards before using them. See the KENWOOD
Motorsports CAM Operations Guide when formatting an SD card.
* You can read the KENWOOD Motorsports CAM Operations Guide on our company website.
https://www.kenwood.com/cs/ce
Removing an SD card
1. Open the side door to access the SD card slot.
2. The SD card will pop out a little when pressed gently.
Close the side door after removing the SD card.
• Close the side door properly so that it latches fully and there are no gaps.
Otherwise, water or foreign matter could enter and cause a malfunction.
Top
Side door
SD card
11
Insert the SD card with the pins
facing the top of the unit.