Sun Microsystems Sun Ray Série Guide De L'utilisateur page 30

Icon
en-10 Sun Ray 150 Enterprise Appliance User's Guide • June 2000
What it means
The unit does not detect an Ethernet
signal. The unit's Ethernet address is
displayed.
The unit cannot communicate with the
server software.
The sound has been muted.
The volume has been changed.
The unit's Ethernet address is
displayed when the three audio
volume control keys are pressed
simultaneously or the Ethernet cable is
initially plugged in.
Action to take
Check that the Ethernet cable is
correctly plugged into the back of the
unit and into the correct network outlet.
If the problem persists, contact your
system administrator.
Contact your system administrator.
Press the Mute key again or use the
Settings screen (page en-12) to unmute
the sound.
Press either of the volume keys or use
the Settings screen (page en-12) to
adjust the volume.
The address disappears after 15
seconds.