Sun Microsystems Sun Ray Série Guide De L'utilisateur page 23

Back and Side Panel Components
1 2 3
Back and Side Panels of the Sun Ray 150 Enterprise Appliance
FIGURE 2
1. Power (DC power in)—Connect the power cord to this receptacle.
2. Projector port—You can connect an external projection display device to this port
for conferences or demos.
Note – The projector port is not for attaching an additional monitor to create a
"dual head" Sun Ray appliance. If a standard CRT monitor is attached to this port,
the CRT screen image may be corrupted due to incompatible display modes.
3. Video in—Input for a device that provides a composite video signal.
4. USB ports 1, 2, 3, and 4—Standard USB ports for peripherals.
5. Network connector—100BASE-T Ethernet cable receptacle (RJ-45).
6. Stereo audio signal line-in 1/8 inch (3.5 mm) stereo mini-plug—Input from an
audio input device.
7. Stereo audio signal line-out 1/8 inch (3.5 mm) stereo mini-plug—Output to an
audio device.
8. Headphone output—Designed to work with low impedance stereo headphones.
4 5
Sun Ray 150 Enterprise Appliance User's Guide
6
7
8
9
en-3